Give now:+86 18929362773sales17@mountopchina.com
JUST 90 SECONDS : UV water purifier turns nearly any tap or clear natural water source into potable drinking water in just 90 seconds, letting you hydrate on the spot. And, since UV water purifier is a water bottle as well as a purification system, you can enjoy your water right after treatment or carry it with you. Reliable Purification, Whatever the Destination.
ITS ALL IN THE CAP : Integrating powerful UV technology into an energy-efficient cap, delivers optimum UV exposure at the press of a button for purification so reliable, Engineered to perform even under the toughest conditions, has been tested and retested under severe conditions to deliver drinking water you can trust, everywhere and every time you need it.
BOTTLE MATERIAL : Made of Eastman Tritan TX2001. Tritan makes the eddy clear, vibrant, durable and 100% BPA-Free.
1. Hold water bottle
A) Unscrew the cap and remove the UV cap from the bottle body.
B) Pour 0.75L/750ML/25oz of clear water into the bottle, and the bottle body shall be marked with a significant mark indicating the position of maximum injection amount.
Special reminder: dirty, polluted, turbidized, discolored or solid particles seriously exceed the standard of water resources, please filter the clear after the transparent effect, can start to sterilize drinking.
2. Start killing germs
A) Put the UV cap back into the bottle body and tighten it.
B) Press the power button (the time is less than 1 second), activate the LCD display screen, the battery symbol displays - battery remaining power.
C) Hold down the power button for about 3 seconds, and the LCD screen will start the UV sterilization countdown.
D) The UV light is on, and the LCD display screen starts to display the remaining time of 90 seconds sterilization countdown.
E) Shaking the water cup sterilization more thoroughly, in the process of UV sterilization, clockwise 180 degrees up and down to turn the cup, can make full use of UV light, to achieve the purpose of complete sterilization.
3. End of UV sterilization:
A) Unscrew the UV sterilization cap and go up and down from the bottle body
B) Troubleshooting.(Our product department can disinfect the outer surface of the bottle body and the screw buckle connecting part of the bottle cap and mouth. Please pay special attention to clean up when drinking water.)
C) Put on a classic bottle cap and twist it tight.
D) The drinking water is sterilized and disinfected.
